Mitel 6940 User Manual

Handling Calls
cliii
2. Swipe up or down to scroll and press the party to whom you wish to transfer the active call.
3. Press the Xfer softkey. The active call will be transferred.
Transferring to a Contact in the Directory
Users can complete a transfer to a contact in their Local Directory. If a user is in a call and initiates
a transfer, they can navigate to the Directory screen and use a softkey configured with Transfer
functionality to complete a blind or consultative transfer.
1. Connect to Party 1 (if not already connected). Party 1 is the party you want to transfer.

Mitel 6940 Specifications

General

Connectivity	Ethernet
Expansion	Supports expansion modules
Power	Power over Ethernet (PoE)
Ethernet Ports	Dual Gigabit Ethernet ports
Supported Codecs	G.711, G.722, G.729
Headset Port	Dedicated headset port
USB Ports	2 x USB 2.0