Softkeys
2.
Select from
Key 1
through
Key 48
on the Top keys.
or
Select from
Key 1
through
Key 30
on the Bottom keys.
3.
In the
Type
field, select
Call History
.
4.
In the
Label
field, enter a label to display on the phone for the key (default is "Call History").
5.
Click
Save Settings
.
Expansion Module Keys
6.
Select from
Key 1
through
Key 84
(M695).
7.
In the
Type
field, select
Call History
.
8.
In the
Label
field, enter a label to display on the phone for the key (default is "Call History").
9.
Click
Save Settings
.
Empty Key
You can set a softkey to force a blank entry on the IP phone display for a specific key. You do this
by setting the softkey to
Empty
. The keys are added in order (from key 1 to Key 30 [bottom] or Key
48 [top]) after any hard-coded keys have been added. If a particular key is not defined, it is ignored.
Configuring an Empty Key Using the Mitel Web UI
1.
Click on
Operation > Softkeys and XML
.
or
Click on
Operation > Expansion Module <N>
.
Softkeys
2.
Select from
Key 1
through
Key 48
on the Top keys.
or
Select from
Key 1
through
Key 30
on the Bottom keys.
3.
In the
Type
field, select
Empty
.
4.
In the state fields, check (enable) or uncheck (disable) the states you want to apply to this softkey.
To Next Page
Loading...
