Softkeys
2.
Select from
Key 1
through
Key 48
on the Top keys.
or
Select from
Key 1
through
Key 30
on the Bottom keys.
3.
In the
Type
field, select
Flash
.
4.
In the
Label
field, enter a label to display on the phone for the key.
Expansion Module Keys
5.
Select from
Key 1
through
Key 84
(M695).
6.
In the
Type
field, select
Flash
.
7.
Click
Save Settings
.
Sprecode Key
You can set a key to automatically activate specific services offered by the server by setting a key
to
Sprecode
. For example, if the sprecode value of *82 is configured, then by pressing the key, *82
automatically activates a service provided by the server. The value you enter for this field is
dependent on the services provided by the server. Contact your System Administrator for information
about available services.
Configuring a Sprecode Key Using the Mitel Web UI
1.
Click on
Operation > Softkeys and XML
.
or
Click on
Operation > Expansion Module <N>.
Softkeys
2.
Select from
Key 1
through
Key 48
on the Top keys.
or
Select from
Key 1
through
Key 30
on the Bottom keys.
3.
In the
Type
field, select
Sprecode
.
4.
In the
Label
field, enter a label to display on the IP phone for this key.
To Next Page
Loading...
