Mitel 6940 - Set Date and Time

Customizing Your Phone
lxiii
6. Press the Save softkey to save your changes.
Set Date and Time
Configuring the Date and Time Using the IP Phone UI
With a valid time server enabled your IP phone will synchronize the time displayed with the specified
configuration server. The phone will use the time from Time Server 1 unless it is not configured or
unavailable, in which case it will move on to Time Server 2, and if necessary Time Server 3.
1. Press on the phone to enter the Options List.
2. Press the Time and Date icon.
3.
Press the Set Date and Time icon.
4. If you want to synchronize the time and date using a time server, ensure there is a checkmark
in the box corresponding to the
Use Network Time setting. If there is no checkmark, press the
checkbox to enable the
Use Network Time setting.
a. Press the Time Server 1 , Time Server 2 , or Time Server 3 field.
b. Using the on-screen keyboard, enter an IP address or domain name for the time server.