Mitel 6940 - Auto-lock and Unlock on Mobile Proximity

Mitel 6940 SIP Phone User Guide
cc
To prevent this, when a mobile phone call is active on a Mitel desktop phone, use the mute/hold call
feature only on the Mitel desktop phone. When a mobile phone call is active on a mobile phone, use
the mute/hold call feature only on the mobile phone.
Goodbye Key Behavior for Mobile Line
When a Mobile line is established with the SIP phone, the Goodbye key functions as follows based
on the SIP line and Mobile line state:
• If the first SIP line has an active call and the second SIP line is ringing
- Pressing Goodbye key cancels the ringing line when
Goodbye Key Cancels Incoming
Call
is enabled.
- ressing Goodbye key cancels the active call line when
Goodbye Key Cancels Incoming
Call
is disabled.
• If the first line has an active BT Mobile call and the SIP line is ringing
- Pressing Goodbye key cancels the ringing line when
Goodbye Key Cancels Incoming
Call
is enabled.
Pressing Goodbye key cancels the BT mobile line if audio is on the desk phone and cancels the
ringing line if audio is on the mobile phone call when
Goodbye Key Cancels Incoming Call is
disabled.
Hot-desking
In Release 5.0.0, mobile integration is supported for hot-desking accounts.
After logging in, hot-desk users can pair, connect, and import contacts from the mobile phone. On
logging out, the mobile phone is disconnected and unpaired from the desk phone, and the mobile
phone contacts removed from the desk phone. On the next login using the same desk phone, any
Bluetooth device that was earlier paired and connected, is automatically paired and connected with
the phone and the mobile phone contacts are imported from the server.
With hot-desking, a desk phone can retain 30 Bluetooth device pairings per user. Of these, two are
special pairings; the pairing with handsets and speakers. Handsets and speakers can be paired with
the desk phone only when logged out of the hot-desking account and the paired state is preserved
between any hot desk log in and log out.
Auto-lock and Unlock on Mobile Proximity
With mobile integration in Release 5.0.0, the 6940 phone automatically locks or unlocks after a
pre-configured delay when a paired mobile phone is disconnected or reconnected.
Users and administrators can configure this feature through the Mitel Web UI, TUI and configuration
files using the following new configuration parameters:
• proximity lock
•proximity unlock
• proximity lock delay
• proximity unlock delay