as a dialpad key or softkey is pressed. With live dialpad disabled, if you dial a number while the
phone is on-hook, lifting the receiver or pressing the initiates a call to that number.
You can enable/disable the live dialpad using the IP phone UI only.
Enabling/Disabling Live Dialpad Using the IP Phone UI
1.
Press on the phone to enter the Options List.
2.
Press the
Dialing
icon.
3.
Press the
Live Dialpad
icon.
4.
Press
On
or
Off
to enable or disable the live dialpad feature.
5.
Press the
Save
softkey to save your changes.
Speed Dial Edit
Restart
You may want to restart your phone to check for updates on the server or you may occasionally
need to restart your phone for configuration changes to your phone or network settings to take effect.
You may also need to restart your phone if you have been asked to do so by your System
Administrator or should you experience any unexpected behavior.
Restarting Your Phone Using the IP Phone UI
1.
Press the button on the phone to enter the Options List.
Note:
Availability of this feature is dependent on your phone system or service provider.
Note:
If required, swipe right to switch pages in the Options List.
Note:
For details on speed dial configuration, see “Speed Dial Key” on page xcix.
To Next Page
Loading...
