Mitel 6940 - Directory

Mitel 6940 SIP Phone User Guide
lxx
5. Press Yes to unpair the device.
The Bluetooth device is removed from the list of
Paired Devices .
Connecting to a Different Paired Bluetooth Device
1. Press on the phone to enter the Options List.
2. Press the Bluetooth icon.
3. Ensure Bluetooth functionality is enabled. If it is not enabled, swipe the Bluetooth toggle button
to the right.
4. In the Paired Devices list, tap the desired Bluetooth device you want to connect to.
The phone attempts to connect to the device.
5. Press the Ok to acknowledge the successful connection.
The connected Bluetooth device is ready to use.
Directory
You can configure directory entries to display using the contact’s first name and then last name or
vice versa. Moreover, the option to sort contacts using either their first name or last name is available
through the
Directory > Settings options menu.
If external Directory sources are configured, you can enable/disable the respective Directory sources
as well as rename Directory folder labels through the
Directory > External Sources options menu.
Settings
Configuring Directory Display and Sorting Options Using the IP Phone UI
1. Press on the phone to enter the Options List.
Note: If connecting fails, an error message displays on screen. Press Retry to
attempt to connect again, or
Cancel to cancel the attempt.
Note: For more information on Directory functionality, see “Directory” on page clx.