Indication of Transferred Calls
When you transfer an active call, the near-end phone displays a
Call Transferred
screen when a
call is transferred and the far-end call is dropped. The figure below illustrates the
Call Transferred
screen on the 6940 phone.
Conferencing Calls
You can use the
Conf
softkey offered on screen when in a connected call to create conference calls
or use a softkey configured with Conference functionality (see “Conference Key” on page cxxvii).
Local Conferencing
The 6940 phone supports up to three parties (including yourself) in a conference call. This is called
local conferencing and is the default method of conferencing on the 6940.
Creating a Conference Call Using Local Conferencing
Use the following procedure to create a conference call using local conferencing.
1.
When you begin a conference, you are the first party in the conference (Party 1). Pickup the
handset or press the key. A line opens up.
2.
Call Party 2 by dialing their number (or answer an incoming call of a party).
Note:
Your System Administrator can set your
Conference
key to speed dial a specific
number. Contact your System Administrator for more information.
To Next Page
Loading...
