Mitel 6940 - Audio; Audio Mode

Mitel 6940 SIP Phone User Guide
lxxviii
Locking and Unlocking the Phone
1. Click on Operation > Phone Lock .
To Lock the Phone
2.
In the Lock the Phone? field, click Lock .
The message
Phone is locked and lock icon displays on the Home screen. Additionally the
Message Waiting Indicator (MWI) will turn on.
Unlocking the Phone
3.
Click on Operation > Phone Lock .
4. In the Unlock the Phone? field, click Unlock .
Audio
The Audio option on the IP phone allows you to set the audio mode for your IP phone, configure
headset settings, and personalize ring tones and tone sets.
Audio Mode
The 6940 allows you to use a handset, a USB or Bluetooth headset, or handsfree mode to handle
incoming and outgoing calls. The
Audio Mode option provides different combinations of these three
methods to provide maximum flexibility in handling calls. There are four audio mode options you
can set:
Audio Mode Option Description
Speaker This is the default setting. Calls can be made or received using the handset or
handsfree speakerphone. In handset audio mode, pressing the button
on the phone switches to handsfree speakerphone. In Speaker audio mode, lift
the handset to switch to the handset.
Headset Choose this setting if you want to make or receive all calls using a handset or
headset. Calls can be switched from the handset to headset by pressing
the button on the phone. To switch from the headset to the handset, lift
the handset.
Speaker/Headset Incoming calls are sent to the handsfree speakerphone first when the
button is pressed. By pressing the button again, you can switch back and forth
between the handsfree speakerphone and the headset. At anytime, lifting the
handset switches back to the handset from either the handsfree speakerphone
or the headset.