Mitel 6940 - Park;Pickup Keys

Mitel 6940 SIP Phone User Guide
cxiv
5. In the Value field, enter the appropriate value for accessing specific services from the server.
6. In the state fields, check (enable) or uncheck (disable) the Connected state for this softkey.
Expansion Module Keys
7. Select from Key 1 through Key 84 (M695).
8. In the Type field, select Sprecode .
9. In the Value field, enter the appropriate value for accessing specific services from the server.
10. Click Save Settings .
Park/Pickup Keys
The 6940 phone has a park and pickup call feature that allows you to park a call and pickup a call
when required.
The park/pickup feature performs as follows:
• When a call comes in and you pickup the handset, you can press the applicable
Park key to
park the call
• After the call is parked, you can press the
Pickup key, followed by the applicable value to pickup
the call
Administrators can configure the
Park and Pickup keys for any line using the configuration files or
the Mitel Web UI.
Users can make changes to customize the label of the
Park and Pickup keys using the Web UI.
Configuring Park/Pickup Keys Using the Mitel Web UI
1. Click on Operation > Softkeys and XML .
or
Click on
Operation > Expansion Module <N>.
Note: For values to enter in this field, contact your System Administrator.
Note: For values to enter in this field, contact your System Administrator.