Mitel 6940 - Intercom Key

Configuring Softkeys
cxxix
Configuring a Transfer Key Using the Mitel Web UI
1. Click on Operation > Softkeys and XML .
or
Click on
Operation > Expansion Module <N> .
Softkeys
2. Select from Key 1 through Key 48 on the Top keys.
or
Select from
Key 1 through Key 30 on the Bottom keys.
3. In the Type field, select Transfer .
4. In the Label field, enter a label to apply to this key.
5. In the state fields, check (enable) or uncheck (disable) the states you want to apply to this softkey.
Expansion Module Keys
6. Select from Key 1 through Key 84 (M695).
7. In the Type field, select Transfer .
8. Click Save Settings .
Intercom Key
You can use the Intercom key to automatically connect with a remote extension for outgoing calls,
and to answer an incoming intercom call.
Note: For more information about the Intercom feature, see “Using Intercom
Functionality” on page cxxxix.