Mitel 6940 - Outgoing Redial Key

Mitel 6940 SIP Phone User Guide
cxxvi
Softkeys
2. Select from Key 1 through Key 48 on the Top keys.
or
Select from
Key 1 through Key 30 on the Bottom keys.
3. In the Type field, select Callers List .
4. In the Label field, enter a label to apply to this key.
5. In the state fields, check (enable) or uncheck (disable) the states you want to apply to this softkey.
Expansion Module Keys
6. Select from Key 1 through Key 84 (M695).
7. In the Type field, select Callers List .
8. Click Save Settings .
Outgoing Redial Key
By default, the 6940 has a dedicated Outgoing Redial key. However, using the Mitel Web UI, you
can assign the
Outgoing Redial key to any key on the top or bottom keys on the phone.
The Outgoing Redial List is a stored log of your outgoing calls. You can use the Outgoing Redial
key to access a list of the most recent calls you placed.
Note: For more information about the Outgoing Redial List, see “Outgoing Redial List”
on page cxl.
Outgoing redial key