Configuring a Outgoing Redial Key Using the Mitel Web UI
1.
Click on
Operation > Softkeys and XML
.
or
Click on
Operation > Expansion Module <N>
.
Softkeys
2.
Select from
Key 1
through
Key 48
on the Top keys.
or
Select from
Key 1
through
Key 30
on the Bottom keys.
3.
In the
Type
field, select
Redial
.
4.
In the
Label
field, enter a label to apply to this key.
5.
In the state fields, check (enable) or uncheck (disable) the states you want to apply to this softkey.
Expansion Module Keys
6.
Select from
Key 1
through
Key 84
(M695).
7.
In the
Type
field, select
Redial
.
8.
Click
Save Settings
.
Conference Key
Using the Mitel Web UI, you can assign a
Conference
key to any key on the top or bottom keys on
the phone.
Note:
For more information about conferencing, see “Conferencing Calls” on page clv.
To Next Page
Loading...
