Configuring Stuttered Dial Tone
1.
Click on
Basic Settings > Preferences > General
.
2.
The
Stuttered Dial Tone
field is enabled by default. To disable this field, uncheck the box.
3.
Click
Save Settings
to save your settings.
XML Beep Support
Using the Mitel Web UI, you can enable or disable a beep to be audible when the phone receives
an XML application using the
XML Beep Support
field at the path
Basic Settings > Preferences >
General
. If you disable this feature, then no beep is heard when the XML application arrives to the
phone.
If your System Administrator has set a value for this feature in a custom XML application or in the
configuration files, the value you set in the Mitel Web UI overrides the Administrator’s setting. Setting
and saving the value in the Mitel Web UI applies to the phone immediately.
To Next Page
Loading...
