Mitel 6940 - Utilizing the Park Call;Pickup Parked Call Feature Using the IP Phone UI

Configuring Softkeys
cxv
Softkeys
2. Select from Key 1 through Key 48 on the Top keys.
or
Select from
Key 1 through Key 30 on the Bottom keys.
3. In the Type field, select Park .
4. In the Label field, enter a label for the Park softkey.
5. In the state fields, check (enable) or uncheck (disable) the Connected state for this softkey.
6. Select from Key 1 through Key 48 .
7. In the Type field, select Pickup
8.
In the Label field, enter a label for the Pickup softkey.
9. In the state fields, check (enable) or uncheck (disable) the states you want to apply to this softkey.
10. Click Save Settings .
11. Click on Reset , then click Restart to restart the IP phone and apply the changes.
Expansion Module Keys
12. Select from Key 1 through Key 84 (M695).
13. In the Type field, select Park .
14. In the Value field, enter the appropriate value for accessing specific services from the server.
15. Select from Key 1 through Key 84 (M695).
16. In the Type field, select Pickup .
17. In the Value field, enter the appropriate value for accessing specific services from the server.
18. Click Save Settings .
19. Click on Reset , then click Restart to restart the IP phone and apply the changes.
Utilizing the Park Call/Pickup Parked Call Feature Using the IP Phone UI
Use the following procedure on the IP phone to park a call and pick up a parked call.
Note: The Value and Line fields are configured by the Administrator.
Note: The Value and Line fields are configured by the Administrator.
Note: The Value and Line fields are configured by the Administrator.
Note: The Value and Line fields are configured by the Administrator.