Mitel 6940 - Outgoing Redial List

Mitel 6940 SIP Phone User Guide
cxl
You can set specific incoming Intercom call features on the 6940 IP phone using the Mitel Web UI.
The following table describes these features.
Outgoing Redial List
The Outgoing Redial List stores information for up to the last 100 numbers you called. Your phone
logs the name/number of the called party, when you called, and if the call was answered or missed.
Additional information such as the duration of the call, line used, and call features utilized during the
call can also be viewed.
You can view, scroll, and delete line items in the Outgoing Redial List from the IP phone UI as wells
as copy selected entries to the Local Directory. You can also dial out directly using a displayed entry
in the Outgoing Redial List.
Incoming Intercom Features in
Mitel Web UI Description
Microphone Mute Allows you to enable or disable the microphone on the IP phone
for Intercom calls made by the originating caller.
Auto Answer Allows you to enable or disable the IP phone to automatically
answer an Intercom call. If auto-answer is enabled on the IP
phone, the phone plays a tone (if Play Warning Tone is enabled)
to alert the user before answering the intercom call. If auto-answer
is disabled, the phone treats the incoming intercom call as a
normal call.
Play Warning Tone Allows you to enable or disable a warning tone to play when the
phone receives an incoming intercom call on an active line.
Allow Barge In Allows you to enable or disable how the phone handles incoming
intercom calls while the phone is on an active call.
Note: For more information about the incoming Intercom features and for procedures
on setting these features, see “Incoming Intercom Call Features” on page ccxiv.
Note: Outgoing Redial List information in this User Guide describes the phone’s native
Outgoing Redial List. In some environments, the Outgoing Redial List key may bring up
an Outgoing Redial List provided by the call manager; therefore, depending on your call
manager, the Outgoing Redial List on your phone may function and behave differently
then what is documented in this User Guide. If this is the case, contact your System
Administrator for more information regarding your specific Outgoing Redial List.