Mitel 6940 - Configuring XML Beep Support; Status Scroll Delay

Mitel 6940 SIP Phone User Guide
ccvi
Configuring XML Beep Support
1. Click on Basic Settings > Preferences > General .
2. The XML Beep Support field is enabled by default. To disable this field, uncheck the box.
3. Click Save Settings .
Status Scroll Delay
Using the Mitel Web UI, you can specify a scroll delay option that allows you to set the time delay,
in seconds, between the scrolling of each status message on the phone. You can specify this setting
in the
Status Scroll Delay (seconds) field at the path Basic Settings > Preferences > General . The
default time is 5 seconds for each message to display before scrolling to the next message. You
can increase or decrease this time as required. Setting and saving the value in the Mitel Web UI
applies to the phone immediately.