5.
Select a value from the
Line N
field
.
6.
Click
Save Settings
.
Installing Custom Ring Tones Using the Mitel Web UI
1.
Click on
Basic Settings > Custom Ringtones
2.
Press the
Browse...
button corresponding to the desired ringtone position (e.g. 1).
3.
Navigate to the folder containing the WAV file you want to upload, select the file using your left
mouse button, and press the
Open
button.
The filename should now be displayed to the right of the respective
Browse...
button.
4.
Press the
Upload
button to upload the file to the phone.
5.
Repeat Steps 2 to 4 to upload additional WAV files to the phone.
Note:
See the “Ring Tones” on page lxxxi for valid values.
Notes:
1.
Access to the Custom Ringtones Web UI menu is only available if enabled by your
System Administrator.
2.
Ringtones must be in .wav format. The IP phones support the following WAV file
specifications:
•G.711
μ
-law and a-law Codec
• 20 ms packet size
• Mono 8KHz
3.
Individual WAV files cannot exceed 1 MB in size (the total combined size of the eight
WAV files cannot exceed 8 MB).
4.
Filenames must contain only ASCII characters.
Note:
Press the
Delete
button to delete the desired ringtone from your phone.
To Next Page
Loading...
