Mold-Masters M2 - 6.21.2 Save modified settings, without losing existing ones

OPERATION
© 2014 Mold-Masters (2007) Limited. All Rights Reserved.
Revised 1 Oct, 2014
6-31
www.moldmasters.com
6.21.2 Save modied settings, without losing
existing ones
If you have changed some tool settings and want to keep them but at
the same time you wish to retain the old unmodied settings then you
must create and save into a new store as follows:
1. Select a spare blank tool tab.
2. Choose [
Save] and [OK].
3. Enter a new tool name and choose [
Enter].