Mold-Masters M2 - EVENT Log and Export

SETUP
© 2014 Mold-Masters (2007) Limited. All Rights Reserved.
Revised 1 Oct, 2014
5-43
www.moldmasters.com
5.19 Event Log and Export Pages
Event Log is used to store and retrieve recent events and is explained
more fully on page 6-16.
Export is used to collate running data and is explained more fully on
page 7-5.
Remote and Quad IO pages
These two pages may be used to connect your controller into a wider
system that allows remote interfacing.
They should only be congured by competent IT staff who are familiar
with networking protocol or machine interface.
Utilities > Remote page.
Utilties > IO Page.
Should you need further information please contact your supplier.