MAINTENANCE
© 2014 Mold-Masters (2007) Limited. All Rights Reserved.
Revised 1 Oct, 2014
7-13
7.9 How to Upgrade the Console Software
In order to maintain our high quality, our development engineers are
making continual improvements to our control system.
It may be possible to apply system upgrades to your own controller;
however, this would depend on the type and age of your equipment.
Contact your supplier with the serial number of your console and he
can tell you about whether your console will accommodate and up-
grade and what may be available.
There is usually no need to return your control system to your supplier
for any upgrades. They may be downloaded via the internet.
These following instructions will guide you through the upgrade proce-
dure.
7.9.1 Preparation
1. Using the URL address that you have been given by Mold-Masters
service department, download the le onto your PC.
2. Copy the upgrade program/data onto a USB memory stick.
3. Before you start any upgrade, shutdown your machine to leave
your console free.
7.9.2 Procedure
1. Select the Utilities page.
2. Insert the USB Flash Memory.
3. Choose [
Upgrade].
4. When the upgrade is complete remove the USB stick and restore
the console.
To Next Page
Loading...
