Using Bluetooth on Windows Devices 5 - 3
Bluetooth Configuration
By default, the MC92N0-G is configured to using the Microsoft stack. Refer to the MC92N0-G Integrator Guide, for
information on switching between the Microsoft Bluetooth stack and the StoneStreet One Bluetooth stack.
Table 5-1 list the services supported by the StoneStreet One Bluetooth stack and the Microsoft Bluetooth stack.
Table 5-2 list the COM ports available for the StoneStreet One Bluetooth stack and the Microsoft Bluetooth stack.
Table 5-1
Bluetooth Services
Microsoft Bluetooth Stack StoneStreet One Bluetooth Stack
Windows Handheld WinCE Windows Handheld WinCE
Serial Port Service Serial Port Service Serial Port Service Serial Port Service
Dial-Up Networking
Client Service
Dial-Up Networking Client
Service
Dial-Up Networking Client
Service
OBEX Object Push
Service
OBEX Object Push Client and
Host Services
OBEX Object Push Client and
Host Services
HID Client Service HID Client Services HID Client Services
A2DP/AVRCP Service LAN Client Services LAN Client Services
Headset Audio Gateway Client
Services
Headset Audio Gateway
Services
Personal Area
Networking Services
Personal Area Networking
Services
Personal Area Networking
Services
File Transfer Client and Host
Services
File Transfer Client and Host
Services
A2DP/AVRCP Services
Table 5-2
COM Ports
Microsoft Bluetooth Stack StoneStreet One Bluetooth Stack
COM5 COM5
COM9 COM9
COM11
COM21
COM22
COM23
To Next Page
Loading...
