3 - 26 MC92N0-G User Guide
•
Private Response: Press and hold the red Private Call button to respond to the originator of the last
broadcast or to make a Private Response.
PTT Audible Indicators
The following tones provide helpful cues when using the voice client.
•
Talk Tone: Double chirp. Plays when the Group (or Private) button is depressed. This is a prompt for the user
to start talking.
•
Access Tone: Single beep. Plays when another user just finished a broadcast or response. The user is now
able to initiate a Group Call or Private Call.
•
Busy Tone: Continuous tone. Plays when the Group (or Private) button is depressed and another user is
already communicating on the same talkgroup. Plays after the maximum allowed talk time is reached (60
seconds).
•
Network Tone:
• Three increasing pitch beeps. Plays when PTT Express has acquired the WLAN connection and the
service is enabled.
• Three decreasing pitch beeps. Plays when PTT Express has lost the WLAN connection or the service is
disabled.
Figure 3-24
PTT Express Default User Interface
Table 3-6
PTT Express Default user Interface Descriptions
Item Description
Notification
Icon
Indicates the current state of the PTT Express client.
Service
Indication
Indicates the status of the PTT Express client. Options: Service Enabled, Service Disabled or
Service Unavailable.
Talk Groups Lists all 32 Talk Groups available for PTT communication.
Settings Opens the PTT Express Settings screen.
Enable/Disable
Switch
Turns the PTT service on and off.
Notification Icon
Service Indication
Settings
Enable/Disable Switch
To Next Page
Loading...
Need help?
General
