Getting Started 1 - 9
Changing the Keypad Backlight Settings
Windows Devices
To change the keypad backlight settings in order to conserve more battery power:
1. On Windows CE devices, tap Start > Settings > Control Panel > Keylight > Battery Power.
or
On Windows Embedded Handheld devices, tap Start > Settings > System > Keylight > Battery Power.
2. Select the On Battery Power: Disable keylight if not used for: check box and select a value from the
drop-down list box.
3. Tap Advanced.
4. Tap the Disable keylight check box to completely turn off the display backlight.
5. Tap OK.
Android Devices
To change the keypad backlight settings in order to conserve more battery power:
1. Touch > Display > Key light.
2. Select one of the options.
•
Always on - The touch key light is on when the screen is on.
•
6 seconds - The touch key light stays on for six seconds then turns off (default).
•
10 seconds - The touch key light stays on for 10 seconds then turns off.
•
15 seconds - The touch key light stays on for 15 seconds then turns off.
•
30 seconds - The touch key light stays on for 30 seconds then turns off.
•
1 minute - The touch key light stays on for one minute then turns off.
3. Touch .
Turning Off the Radios
On Windows Embedded Handheld Devices
Windows Embedded Handheld devices include Wireless Manager, which provides a simple method of enabling,
disabling, and configuring all the device’s wireless capabilities in one place.
To open Wireless Manager, tap the Status Bar and then the Connectivity icon and select Wireless Manager or
tap Start > Settings > Connections > Wireless Manager.
•
To enable or disable a wireless connection, tap its blue bar.
•
To enable or disable all wireless connections, tap and hold the All bar.
•
To configure settings for a connection, tap Menu.
To Next Page
Loading...
Need help?
General
