Operating the MC92N0-G with Windows OS 2 - 25
To perform a cold boot:
1. Press the red Power button. The PowerKey Action window appears.
2. Tap Safe Battery Swap.
3. Press the primary battery release on the MC92N0-G to partially eject the battery from the MC92N0-G.
4. While the battery is partially released, simultaneously press and release the handle trigger and the Power
button.
5. Push the battery to fully re-insert it in the MC92N0-G. One audible click can be heard as the battery is fully
inserted.
6. The MC92N0-G reboots.
7. Calibrate the screen. See Calibrating the Screen on page 1-6 to calibrate the MC92N0-G screen.
Windows Embedded Handheld Devices
There are two reset functions, warm boot and cold boot.
•
A warm boot restarts the MC92N0-G and closes all running programs.
•
A cold boot also restarts the MC92N0-G and closes all running programs but also installs some drivers.
Data saved in flash memory or a memory card is not lost. Perform a warm boot first. This restarts the MC92N0-G
and saves all stored records and entries. If the MC92N0-G still does not respond, perform a cold boot.
Performing a Warm Boot
Hold down the Power button for approximately five seconds. As soon as the MC92N0-G starts to perform a warm
boot release the Power button.
Performing a Cold Boot
A cold boot restarts the MC92N0-G. The operating system and all applications are restarted. File storage is
preserved.Only perform a cold boot if a warm boot does not solve the problem.
To perform a cold boot:
1. Press the red Power button. The PowerKey Action window appears.
2. Tap Safe Battery Swap. The Indicator LED Bar lights red.
3. Press the primary battery release on the MC92N0-G to partially eject the battery from the MC92N0-G.
4. While the battery is partially released, simultaneously press and release the trigger and the Power button.
5. Push the battery to fully re-insert it in the MC92N0-G. One audible click can be heard as the battery is fully
inserted.
6. The MC92N0-G reboots.
To Next Page
Loading...
Need help?
General
