Operating the MC92N0-G with Windows OS 2 - 17
a. Enter a seven character password in the Password: field. A strong password must contain at least seven
characters and contain at least three of the following: uppercase and lowercase letters, numerals, and
punctuation.
b. Re-enter the password in the Confirm: field.
6. Tap .
Using the Power Button
Press the red Power button to turn the MC92N0-G screen on and off (suspend mode). The MC92N0-G is on when
the screen is on and the MC92N0-G is in suspend mode when the screen is off. For more information, see Starting
the MC92N0-G on page 1-6.
The Power button is also used to reset the MC92N0-G by performing a warm or cold boot.
On Windows CE devices:
• Warm Boot - Resets the MC92N0-G.
• Cold Boot - Resets the MC92N0-G, removes all added applications not stored in the Application folder and
restores all factory default settings.
•
On Windows Embedded Handheld devices:
• Warm Boot - Resets the MC92N0-G. Operating system and all applications are restarted. File storage is
preserved.
• Cold Boot - Resets the MC92N0-G. Operating system and all applications are restarted. File storage is
preserved. Normally only used when a warm boot does not initiate.
For information about booting the MC92N0-G, see Windows Embedded Handheld Devices on page 2-25.
Wireless LAN
To configure the MC92N0-G, a set of wireless applications provide the tools to configure and test the wireless radio
in the MC92N0-G. Refer to the Wireless Fusion Suite User Guide for Version X2.01 for information on configuring
wireless profiles. Go to http://www.zebra.com/support for the latest version of this guide. See Software Versions on
page xiv to determine the Fusion version on the MC92N0-G.
Windows CE Devices
Tap the Signal Strength icon to display the Wireless Launcher menu.
NOTE Applications that are added to the Application folder are not removed when a cold boot is performed. The
Application folder is in flash memory.
NOTE By default, the WLAN is on when the MC92N0-G boots up. To set the WLAN radio to be off when
the MC92N0-G boots up, see the MC92N0-G Integrator Guide.
To Next Page
Loading...
Need help?
General
