5 - 36 MC92N0-G User Guide
•
Use PIN Code (Incoming Connection) - Select for automatic use of the PIN code entered in the PIN Code
text box. It is recommended not to use this automatic PIN code feature. See Security on page 5-2 for more
information.
•
PIN Code - Enter the PIN code.
•
Encrypt Link On All Outgoing Connections - Select to enable or disable encryption on all outgoing
connections to other Bluetooth devices.
Discovery Tab
Use the Discovery tab to set and modify discovered devices.
Figure 5-33
BTExplorer Settings - Discovery
•
Inquiry Length - Sets the amount of time the MC92N0-G takes to discover Bluetooth devices in the area.
•
Name Discovery Mode - Select either Automatic or Manual to automatically attempt to discover a
Bluetooth device's name after finding the device.
•
Discovered Devices - Delete Devices - Deletes all discovered devices and link keys from memory.
•
Discovered Devices - Delete Linked Keys - Removes all pairing from remote Bluetooth devices, and
makes them all un-trusted.
Virtual COM Port Tab
Virtual COM Port defines which COM ports BTExplorer attempts to use for virtual COM ports. Check the
appropriate checkbox to use the port as a virtual COM port. When finished, choose Apply to enforce changes, or
Revert to restore the original settings.
•
COM5:Bluetooth - Enable or disable COM Port 5.
•
COM9:Bluetooth - Enable or disable COM Port 9.
•
COM11:Bluetooth - Enable or disable COM Port 11.
•
COM21:Bluetooth - Enable or disable COM Port 21.
•
COM22:Bluetooth - Enable or disable COM Port 22.
NOTE To use PIN Code, select Authenticate or Authenticate/Encrypt from the Service Security drop-down
list on each local service.
To Next Page
Loading...
Need help?
General
