Motorola MC92N0-G User Manual

3 - 28 MC92N0-G User Guide
Creating a Group Call
1. Press and hold the green Group Call button and listen for the talk tone to play.
2. If a busy tone is heard, release the green Group Call button and wait a moment before making another
attempt. Ensure that PTT Express and the WLAN are enabled.
3. Start talking after the talk tone is heard.
4. Release the button when finished talking.
Creating a Private Call (One to One)
The Private Call can only be initiated once a Group Call has been established.
The initial Private Call is made to the last talker on the Group Call.
1. Wait until an access tone is heard.
2. Within 10 seconds, press and hold the red Private Call button, and listen for the talk tone to play.
If a busy tone is heard, release the red Private Call button and wait a moment before making another attempt.
Ensure that PTT Express and the WLAN are enabled.
3. Start talking after the talk tone plays.
4. Release the Private Call button when finished talking.
Disabling PTT Express Voice Client Communication
1. Touch > .
2. Slide the Enable/Disable Switch to the OFF position. The button changes to OFF.
3. Touch .
MLog Manager
Use MLog Manager to capture log files for diagnostics. See the MC9200 Integrator Guide for detailed information
on configuring the application.
NOTE If the user holds the button for more than 60 seconds (default), the call is dropped allowing others to make
Group calls. The user should release the button when finished talking to allow others to make calls.

Motorola MC92N0-G Specifications

General

Brand	Motorola
Model	MC92N0-G
Category	Barcode Reader
Language	English