Accessories 7 - 21
Modem Dongle
This section describes how to setup and use the MDM9000 Modem Dongle.
Figure 7-17
Modem Dongle
The Modem Dongle enables data communication between the MC92N0-G and a host computer, remotely through
the phone lines, and synchronizes information between the MC92N0-G and a host computer.
The following items are required for a modem connection:
•
Telephone number, IP address and DNS/WINS address information from the dial-in server administrator
•
Dial-in account on the host system, including a user ID and password
•
RJ11 or RJ12 modem cable
•
Functioning telephone jack that supports plug-in modems connected to the local telephone system
•
Setup of Country Codes to use the modem with the appropriate country’s telephone network.
The following items are required for communication:
•
MC92N0-G
•
Cable Adapter Module (CAM), Zebra p/n ADP9000-100 (see Cable Adapter Module on page 7-16)
•
Serial Adapter Cable (for communication via cradle), Zebra p/n 25-63856-01
•
Microsoft ActiveSync
•
Setup of host computer and MC92N0-G.
NOTE Windows devices only.
Serial Port
Line In Port
LEDs
Phone Port
To Next Page
Loading...
Need help?
General
