Accessories 7 - 7
•
Synchronizes information between the MC92N0-G and a host computer. (With customized or third party
software, it can also be used to synchronize the MC92N0-G with corporate databases.)
•
Charges the MC92N0-G’s battery.
•
Charges a spare battery.
The Single Slot Serial/USB Cradle can charge the MC92N0-G’s main battery and a spare battery simultaneously.
The MC92N0-G’s amber charge LED, located in the Indicator LED Bar, shows the status of the battery charging in
the MC92N0-G. See Table 1-1 on page 1-4 for charging status indications.
The amber spare battery charging LED on the cradle (see Figure 7-2 on page 7-6) shows the status of the spare
battery charging in the cradle. See Table 7-3 for charging status indications.
Batteries usually charge in less than four hours.
Table 7-2
Spare Battery LED Charging Indicators
Spare Battery LED
(on cradle)
Indication
Off No spare battery in well; spare battery not placed correctly; cradle is not powered.
Fast Blinking Amber Error in charging; check placement of spare battery.
Slow Blinking Amber Spare battery is charging.
Solid Amber Charging complete.
To Next Page
Loading...
Need help?
General
