Accessories 7 - 15
To use the MSR:
1. Attach the MSR to the MC92N0-G (see Attaching and Removing on page 7-12).
2. Power on the MC92N0-G.
3. Launch an MSR enabled application.
4. Swipe the magnetic stripe card through the MSR, ensuring the magnetic stripe on the card faces the
MC92N0-G. The card may be swiped in either direction, from left to right or from right to left. For best results,
gently press down on the card while swiping to ensure contact with the bottom of the reader.
Figure 7-10
Magnetic Stripe Card Swiping
To Next Page
Loading...
