User’s Guide Kona cutting plotter
Contour cutting
AP-75380 - Revision 1.2 133
6
6.3.3 Multi frame alignment method
The Mutoh Multi frame alignment method offers all advantages of the previous one but it will
split the image in multiple segments. This is to enhance precision over long length. This
method should be used in combination with Mutoh’s CutServer.
With this method, it is possible to make signs of 10m or longer, and the Kona will measure
segment per segment, and cut segment per segment. This method gives you more accuracy
than the previous method. We do not recommend this method for signs smaller than 1,5m.
Refer to the Kona application guide for all details about Mutoh’s CutServer and the
Print&Cut workflow.
To Next Page
Loading...
