MUTOH Kona - Pens; Knife Holder with Depth Change Indication

User’s Guide Kona cutting plotter
Consumables
180 AP-75380 - Revision 1.2
10.1.2 Knife Holder with Depth Change Indication
10.2 Pens
Picture part number Description
ZMY-10034B
Knife Holder with Depth Change Indication
Including one blade, 45° angle, 0.5 mm
offset
Blades for Knife Holder with Depth Change Indication - 0.5 mm
offset
ZME-10034A Cutting Knife Blades 30° angle (set of two)
ZME-10034B Cutting Knife Blades 45° angle (set of two)
ZME-10034C Cutting Knife Blades 60° angle (set of two)
Picture part number Description
PSGBBK Pressurized ballpoint pen.