MUTOH Kona - Possibility 3

User’s Guide Kona cutting plotter
Basics
AP-75380 - Revision 1.2 49
3
Possibility 3
Loading sensitive medium sized media
Note
 When working on a Kona 1400 or Kona 1650 with sensitive media files where it
is not wanted to leave any pressure roller marks, it is possible to disable the
middle grit roller. To do so, move it to the docking station. The pressure roller
will be disabled as soon as you lower them.
 Be aware that the cutter may have less tracking when doing this.
1
23
4
567
89
10
1112
13
Schematic overview Kona 1650