176 AP-75380 - Revision 1.2
User’s Guide Kona cutting plotter
Troubleshooting
9.2.4 MGL errors (ID 4000-5000)
As from the moment data is sent to the Kona which is not correct, an error and sub error number will be displayed. Please find below a list with
explanations of these sub numbers.
Sub number Description
0 No parameters allowed
1 No parameter case is illegal
2 Not enough parameters
3 Too many parameters
4 Illegal command termination
5 Illegal command definition
6 Undefined program flow
7 Parameter size overflow
To Next Page
Loading...
