MUTOH Kona - Pressure Roller Positioning Warning

158 AP-75380 - Revision 1.2
User’s Guide Kona cutting plotter
Troubleshooting
Pressure roller positioning warning
If a pressure roller is wrongly positioned, the Kona will show a warning message during the media measurement. There are 3 types of warning
messages.
 Move pressure roller. (Can appear on Kona 760 - 1400 - 1650)
 In case the pressure roller is not positioned correctly, a warning message appears. Move the requested grit roller to the requested position.
Refer to Pressure roller positioning on page47
for more information.