MUTOH Kona - Room Conditions

User’s Guide Kona cutting plotter
Product overview
AP-75380 - Revision 1.2 17
2
2.2.3 Room conditions
 Please protect your cutter from moisture, dust, draught and direct sunlight (to prevent
possible media detection and epos readout issues). It is best to keep your machine away
from open windows and air-conditioners.
 See to it that there is an adequate space around the cutter so that ventilation is not
obstructed.
 Avoid unnecessary vibrations and set up your cutter on a level surface.
 Be sure to have some free space on each side of the Kona to ease the operating of it.
 a = at least 1 meter
 b = at least 1 meter
 c = at least 1 meter
 d = at least 0,2 meter
a
b
c
d