Chapter 10 SECURITY SETUP
10.3 Setting/Performing each option
F-52, 53, 54, 55 127
7. By the same procedure above,
input the new password.
8. Press F4 (REGISTER).
The password is changed, and the
OPERATOR REGISTRATION screen
appears.
● Operator deletion
The registered operator can be deleted on the
OPERATOR REGISTRATION screen.
Leave at least one Administrator in the sys-
tem.
Deleting the Administrator with the User
Control option ON will make the User Control
status unable to change.
1. Press ↑ or ↓ key and select the
operator to be deleted from the
registration.
2. Press the ENTER key.
Move the cursor to the CHANGE OF
PASSWORD option.
3. Press ↑ or ↓ key, and select the
DELETION OF OPERATOR
option.
4. Press the ENTER key.
The confirmation window (for the
operator deletion) appears.
5. Press F4 (CONFIRM).
The operator is deleted, and the
OPERATOR REGISTRATION
screen is displayed.
To cancel the operation, press F1
(CANCEL).
To Next Page
Loading...