Chapter 11 METER SETTING
11.2 System setup
F-52, 53, 54, 55 135
Setting procedure
1. In the SYSTEM SETUP screen,
select AUTOHOLD option by ↑ or
↓ key.
2. Press ← or → key and select the
mode for potential stability
(EXACT/NORMAL/BRIEF/TIME/
OFF).
3. Press F4 (RETURN).
The setting is reflected, and the dis-
play returns to the SETUP screen.
In selecting “TIME”
When the mode option “TIME” is selected in the step 2. above, set the time until the measure-
ment value is held by the following step:
1. Press ENTER key.
Move the cursor to the time setting field.
2. Press ENTER key again.
The display color for the set part changes, and the values can be input by ↑ or ↓ key.
Setting range: 2 to 999 (sec)
3. Press F4 (RETURN).
The setting is reflected, and the display returns to the SETUP screen.
To Next Page
Loading...