NAVI F-52 - Page 17

Chapter 1 Overview
1.2 Functions
4HORIBA
pH
measure-
ment
setup
Changes the indicated res-
olution of pH
pH SETUP
→ DISPLAY OPTION
All models Page
38
Inputs the temperature of
standard thermometer with
-
out temperature sensor
pH SETUP
→ TEMP COMPENSATION;
MTC
All models Page
39
Performs temperature con-
version of the measurement
value according to the tem
-
perature characteristics of
the sample
pH SETUP
→ TEMP COEFFICIENT;
ON
All models Page
40
Saves the electrode model
and Lot in memorizing the
data
pH SETUP
→ ELECTRODE MODEL
pH SETUP
→ ELECTRODE LOT
All models Page
41
Page
42
Sets the standard solution
for the pH calibration
pH SETUP
→ F1 (CAL SETUP)
pH CALIBRATION SETUP
→ BUFFER
All models Page
44
Sets the calibration point pH SETUP
→ F1 (CAL SETUP)
pH CALIBRATION SETUP
→ CAL POINTS
All models Page
46
ERR08 (Calibration Error)
lights up at the set calibra
-
tion interval
pH SETUP
→ F1 (CAL SETUP)
pH CALIBRATION SETUP
→ CAL INTERVAL; ON
All models Page
47
Confirms the repeatability
by the standard solution of
pH 7 at the calibration
before measurement. (Pre
-
liminary inspection)
pH SETUP
→ F1 (CAL SETUP)
pH CALIBRATION SETUP
→ REPEATABILITY; ON
All models Page
48
Sets the type of periodical
inspection
pH SETUP
→ F1 (CAL SETUP)
pH CALIBRATION SETUP
→ SYSTEM CHECK
All models Page
49
Item Function How to set
Available
model
Refer
to