NAVI F-52 - Page 16

Chapter 1 Overview
1.2 Functions
F-52, 53, 54, 55 3
Mea-
sure-
ment
Data
Memory
Changes the hold condition
of the measurement data
SYSTEM SETUP
→ AUTO HOLD
All models Page
134
Identifies the sample and
memorizes the data
In the Measurement screen,
press F3 (DATA IN) to pro
-
ceed the Sample ID setting
→ F4(DATA MEMORY)
All models Page
115
Memorizes the data contin-
uously in a certain time
span
SYSTEM SETUP
→ AUTO HOLD; OFF
→ INTERVAL MEMORY; ON
In the Measurement screen
press F3 (DATA IN) to pro
-
ceed the Sample ID setting
Press F4(DATA MEMORY)
In Measurement screen
press the MEAS key to start
MEMORY
All models Page
113
Calls up the memorized
data
Press F2 (DATA OUT) in the
Measurement screen
All models Page
116
Deletes the memorized
data
MAINTENANCE
→ CLEAR DATA MEMORY
All models Page
142
Copies the data to the com-
pact flash card
COMPACT FLASH SETUP
→ DATA COPY SETUP
F-53,54,55 Page
144
Com-
mon
opera
-
tion
Mutes the operation sound SYSTEM SETUP
→ SOUND; OFF
All models Page
137
Controls the screen bright-
ness
MAINTENANCE → BRIGHT-
NESS OF DISPLAY
All models Page
140
Controls the screen color
tone
MAINTENANCE
→ DISPLAY COLOR
All models Page
140
Turns the display of the
navigation character OFF
MAINTENANCE
→ CHARACTER; OFF
All models Page
140
Sets the time until the
screens (backlight OFF) go
to the power saving mode
MAINTENANCE
→ BACK LIGHT OFF TIME
Setting 0 (min) will not pro-
ceed to power saving screen
All models Page
142
Returns the setting to the
initial value
MAINTENANCE
→ INITIALIZATIOＮ OF
SETTINGS
All models Page
142
Displays temperature more
accurately
Adjusts the temperature
indication to the standard
thermometer
MAINTENANCE
→ TEMP CALIBRATION
All models Page
143
Item Function How to set
Available
model
Refer
to