NEC SL 1000 - Page 156

Item
No.
Item Input Data Description Default Related
Program
23 Speed Dial Pre-
view Mode
0 = Preview
1 = Outgoing Immedi-
ately
This option defines how a speed dial
key functions when pressed. If set to
Preview (0), the speed dial number
can be previewed before dialing. If
set to Outgoing Immediate (1), the
number is dialed immediately.
0
27 Handset Volume 0 = Back to Default
(Back)
1 = Stay at previous
level (Stay)
Determine how an extension hand-
set volume is set after it is adjusted
during a call.
1
28 Message Waiting
Lamp Color
0 = Green
1 = Red
Determine whether an extension
Message Waiting Lamp lights Green
(0) or Red (1) when a message is
received.
0
29 PB Back Tone
Level
1 ~ 63 (- 15.5 dB ~ +
15.5 dB)
This program allows adjustment of
the PB Back Tone Level when you
are calling an ISDN Line.
32 (0 dB)
30 Toll Restriction
Class
0 = Virtual Extension
(Follows virtual exten-
sion Toll Class in PRG
21-04.)
1 = Real Extension
(Follows physical sta-
tions Toll Class in PRG
21-04.)
Select the Toll Restriction Class to
use when placing a call from a virtu-
al extension.
1 15-02-21
34 Call Register
Mode
0 = Trunk Mode
1 = Extension/Trunk
Mode
The Caller ID Scroll stores Trunk
calls only (0), or both Internal and
Trunk calls (1).
1
35 Message Waiting
Lamp Cycle for
Calling Exten-
sion
1 = Cycle 1
2 = Cycle 2
3 = Cycle 3
4 = Cycle 4
5 = Cycle 5
6 = Cycle 6
7 = Cycle 7
Select the cycle method that the
Large LED flashes when the exten-
sion has set Message Waiting.
7
36 Message Waiting
Lamp Cycle for
Called Extension
1 = Cycle 1
2 = Cycle 2
3 = Cycle 3
4 = Cycle 4
5 = Cycle 5
6 = Cycle 6
7 = Cycle 7
Select the cycle method that the
Large LED flashes when the exten-
sion has Message Waiting set to the
extension.
3
37 Voice Mail Mes-
sage Wait Lamp
Color
0 = Green
1 = Red
Select the color of the Large LED
when a voice mail message is wait-
ing at the extension.
1
38 Voice Mail Mes-
sage Wait Lamp
Cycle
1 = Cycle 1
2 = Cycle 2
3 = Cycle 3
4 = Cycle 4
5 = Cycle 5
6 = Cycle 6
7 = Cycle 7
Select the cycle method that the
Large LED flashes when the exten-
sion has a VM Message Waiting set
to the extension.
3
40 Additional Dial
for Caller ID Call
Return
Up to four digits (0, 1 ~
9, #,
*
)
Enter the digits to be dialed in front
of the Caller ID when using the Call-
er ID Return function.
No Setting
41 Incoming Ring
Setup
0=Speaker Normal
Ring
1=Headset Ring
0 11-11-37
11-11-62
15-02-12
15-02-42
20-13-06
SL1000/SL1100 ISSUE 3.01
2-134 Program 15 : Extension, Basic Setup
Program
15