S350 Series 24-Port (PoE+) and 48-Port Gigabit Ethernet Smart Managed Pro Switches
Manage Device Security User Manual254
The range is a percent of the total threshold between 0 and 100%. The default is 5%.
9. From the Control Action mode menu, select one of the following options:
• None. No action is taken. This is the default setting.
•
Trap. If the threshold of the configured broadcast storm is exceeded, a trap is sent.
• Shutdown. If the threshold of the configured broadcast storm is exceeded, the port is
shut down.
10. Click the Apply button.
Your settings are saved.
Configure Storm Control Settings for One or More Ports
After you configure the global settings, you can specify storm control settings for one or more
ports.
To configure storm control settings for one or more ports:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Discover or Change the Switch IP
Address on page 12.
The login window opens.
4. Enter the switch’s password in the Password
field.
The default password is password.
The System Information page displays.
5. Select Security > T
raffic Control > Storm Control.