Nikon Z8 - Page 736

Role Description
F
[Save focus position]
Holding the contr
ol saves the current focus position.
The saved position can be restored using a control
to which [Recall focus position] has been assigned
(“memory recall”).
When saving the focus position, you can choose whether it
can be recalled using any of the controls to which [Recall
focus position] is assigned ([Save to all]) or using only a
specific control ([Save individually]).
For more information, see “Saving and Recalling Focus
Positions” (
0 636).
H
[Recall focus
position]
Pr
essing the control recalls a focus position saved using a
control to which [Save focus position] has been assigned.
For more information, see “Saving and Recalling Focus
Positions” (
0 636).
A
[AF-ON]
Pressing the control initiates autofocus, duplicating the
function of the AF-ON butt
on.
When AF-C is selected for focus mode, the camera will
focus at the speed selected for Custom Setting g6 [AF
speed].
G
[Fast AF‑ON]
Pressing the control initiates autofocus, duplicating the
function of the AF-ON button.
When AF-C is selected for focus mode, the camera will
focus at maximum speed, regardless of the option chosen
for Custom Setting g6 [AF speed].
F
[AF lock only] Focus locks while the control is pressed.
E
[AE lock (Hold)]
Exposure locks when the control is pressed. Exposure lock
does not end when recording begins. Exposure remains
locked until the control is pressed a second time or the
standby timer expires.
N
[AWB lock (hold)]
If [Auto] or [Natural light auto] is selected for white
balance, white balance will lock when the control is pressed
(white-balance lock). White-balance lock does not end when
recording begins. The lock will however be released when the
control is pressed a second time or the standby timer expires.
662
g2: Custom Controls