Nikon Z8 - Page 737

Role Description
O
[AE/AWB lock
(hold)]
Exposur
e locks when the control is pressed. White balance will
also lock provided [Auto] or [Natural light auto] is selected
for white balance. Exposure and white-balance lock do not
end when recording begins. The lock will however be released
when the control is pressed a second time or the standby
timer expires.
C
[AE lock only] Exposure locks while the control is pressed.
B
[AE/AF lock] Focus and exposure lock while the control is pressed.
K
[Switch FX/DX]
Press the control to switch between [FX] and [DX] image
areas.
p
[View assist]
Press the control to select [ON] for Custom Setting g11 [View
assist]. Press again to select [OFF].
E
[High-frequency
flicker reduction]
Pressing the control allows shutter speed to be fine-tuned in
smaller increments. Press the control a second time to restore
normal shutter-speed selection.
L
[Silent mode]
Press the control to enable silent mode. Press again to
disable.
M
[Cycle live view info
display]
Press the control to cycle the shooting display. The type and
content of the displays available can be chosen using Custom
Settings g16 [Custom monitor shooting display] and g17
[Custom viewfinder shooting display].
b
[Live view info
display off]
Press the control to hide icons and other information in the
shooting display. Press again to view.
b
[Framing grid]
Press the control to display a framing grid. To hide the grid,
press the control again. The display type can be selected
using Custom Setting g14 [Grid type].
p
[Zoom on/off]
Press the control to zoom the display in on the area around
the current focus point. Press again to cancel zoom.
663
g2: Custom Controls