Nikon Z8 - Page 741

Role Description
i
[Portrait impression
b
alance]
Press the control and rotate a command dial to choose a
portrait impression balance mode.
w
[Metering]
Press the control and rotate a command dial to choose a
metering option for use during video recording.
z
[Focus mode/AF-
area mode]
Hold the control and rotate the main command dial to
choose the focus mode, the sub-command dial to choose the
AF-area mode.
a
[Control lock]
Press the control and rotate the main command dial to
lock shutter speed (mode M). To lock aperture (modes A
and M), press the control and rotate the sub-command
dial.
To lock focus-point selection, hold the control while using
the multi selector to choose the focus point.
H
[Microphone
sensitivity]
Press the control and rotate a command dial to adjust
microphone sensitivity.
X
[Focus (M/A)]
The lens control ring can be used for manual focus regardless
of the option selected for focus mode. To refocus using
autofocus, press the shutter-release button halfway or press
a control to which AF-ON has been assigned.
q
[Power aperture] Rotate the lens control ring to adjust aperture.
E
[Exposure
compensation]
Adjust exposure compensation either by holding the control
and rotating a command dial or by rotating the lens control
ring.
9
[ISO sensitivity]
Adjust ISO sensitivity either by holding the control and
rotating a command dial or by rotating the lens control ring.
H
[Hi-Res Zoom]
Rotate the lens control ring to zoom in or out using Hi-Res
Zoom.
[None] The control has no effect.
667
g2: Custom Controls