Omron eCobra 600 - Page 179

Chapter 9: IP65 Option
1
2
4
3
Figure 9-8. Cover Removal Instructions
Table 9-1. Cover Removal Description
Item Description
1 Remove this screw (one on each side)
2 Collar Nut
3 Remove these screws (4 on each side)
4 Remove this screw (one on each side)
8.
When all 8 screws are loose (but not removed), lift the cover up and slide it back along
the cable track and out of the way. Protect the cover with a soft cloth or other padding
material so the cover does not get scratched. See Figure 9-9.
14402-000 Rev. F eCobra User's Guide 179