Omron NS Programming Manual

Section 2 NS Series Functions 2-8 Common Functional Object Functions
2-103
NS Series Programming Manual
Turn ON the Specified Addresses when the Value is Written
A specified address can be turned ON (1) whenever a button is pressed or a value is entered and written.
Turn OFF the address from a PLC or other external device.
R
R
R
e
e
e
f
f
f
e
e
e
r
r
r
e
e
e
n
n
n
c
c
c
e
e
e
♦
Set the same host address for the write address on the General Tab and the address set under
Turn ON the specified address when the value is written (confirmed).
If a different host is set, the address set under Turn ON the specified address when the value is
written (confirmed)
may turn ON before the write address contents have been changed, depending
on the communications timing.
♦
When exporting data, specify the CSV file’s character code (multibyte code or Unicode).
♦
It is also possible to import CSV files that were exported from the CX-Designer.
Record Operation Log
Select Record Operation log to keep a history of functional object operations during PT operation. Set
the message character strings added to the operation log to 32 characters of less for each label.
Refer to
2-20-1 Operation Log Function for information on operation log functions and settings.

Omron NS Specifications

General

Power Supply	24 VDC
Display Size	5.7 to 12.1 inches (depending on the model)
Resolution	320 x 240 to 800 x 600
Touchscreen Type	Resistive
Display Type	TFT LCD
Communication Interfaces	RS-232C, RS-422/485, Ethernet, USB
Memory	Flash memory
Operating Temperature	0 to 50°C (depending on the model)
Storage Temperature	-20°C to 60°C
Protection Rating	IP65 (front panel)
Dimensions	Varies depending on the model
Weight	Varies depending on the model
CPU	Proprietary Omron CPU (performance varies depending on the model)