Section 1 Overview 1-2 NS-series PT Functions
1-6
NS Series Programming Manual
Data is saved in CSV files, which are easy to use on a personal computer.
Screen Data Confirmation Function
Screens can be checked even if CX-Designer is not connected, by using the System Menu on the PT.
Large Increase in Object Capacity
The number of objects that can be registered to screens has been increased dramatically. This allows
screens with better display to be created. Refer to Display Specifications in Appendix 1 Specifications
for details.
Character Display in Windows Fonts
Fonts used in Windows can be used in fixed (text) displays.
Simple Upgrades
The system program can be replaced using a Memory Card.
Conforms to International Standards
The PT conforms to UL standards, CSA standards, and EC Directives.
Multiple Windows
Up to 3 pop-up windows can be displayed at the same time on a normal screen. Commands to switch
screens can also be given from the host.
Strong Processing Functions Using Macros
1. Various instructions are available, including arithmetic operations, bit operations, logic operations,
comparison operations, screen controls (open, close, etc.), and object movement.
2. Processing can be performed independently from the host or data from the host can be further
processed and the results can be displayed on the screen.
3. Host data processing can be transferred to macros to reduce the load on the host.
Multiple Label Registration
1. Up to 16 different languages or labels for production lines can be registered on one screen in the
NS-series PTs.
2. The displayed label can be switched during operation.
More than 1,000 Standard Parts
NS-series PTs provide not only touch switches and lamps, but also complicated parts such as toggle
switches and 7-segment displays. It is easy to create attractive screens simply by pasting on the
CX-Designer.
To Next Page
Loading...
Need help?
General
