Omron NS Programming Manual

Section 2 NS Series Functions 2-11 Multifunction Objects
2-199
NS Series Programming Manual
Write Data from NS to CSV File
Transfers one record of data from the specified addresses in the NS to the specified record in the CSV
file.
1
2
3
4
5
No. Item Details
1 Record No. Specifies the record number in the CSV file (0 to 999) to use in the control opera-
tion.
The record number can be set indirectly through a communications address by
selecting the Indirect Option.
2 File Location Specifies either the NS or the Memory Card as the location of the CSV file.
The file location can be set indirectly by selecting the Indirect Option.
If the specified address is 0, the NS will be used.
If the specified address is 1, the Memory Card will be used.
3 Record Method The data at the specified record can be overwritten or it can be inserted at the
specified record number.
The record method can be set indirectly by selecting the Indirect Option.
If the specified address is 0, the data will be overwritten.
If the specified address is 1, the data will be inserted.
4 Address Specifies the PT memory address where the one record of data to be written to
the CSV file is stored.
5 Record Label Specifies whether to include the record label when reading.

Omron NS Specifications

General

Power Supply	24 VDC
Display Size	5.7 to 12.1 inches (depending on the model)
Resolution	320 x 240 to 800 x 600
Touchscreen Type	Resistive
Display Type	TFT LCD
Communication Interfaces	RS-232C, RS-422/485, Ethernet, USB
Memory	Flash memory
Operating Temperature	0 to 50°C (depending on the model)
Storage Temperature	-20°C to 60°C
Protection Rating	IP65 (front panel)
Dimensions	Varies depending on the model
Weight	Varies depending on the model
CPU	Proprietary Omron CPU (performance varies depending on the model)